Spring-Assisted Stopper Ring to limit the movement of the horizontal shaft in the pivot unit. The stopper is suitable for 6-mm guide rods and compatible with all Hapstone knife sharpeners, TSProf Blitz and Kadet.

Many guided knife sharpeners include L-shaped Allen keys, the least expensive tool to handle hex screws. Hex screwdrivers are much easier to use than Allen keys. If you use your sharpener on a regular basis, hex screwdrivers will make your...

Designed for mounting the standard K03 and Kadet clamps on the turning frame. Positioning the clamps with the adapter on the edges of the frame allows an increase effective length of the frame by 4 cm. This extends the clamping...

The Thickness Compensator is a simple tool for maintaining the chosen sharpening angle while working with sharpening stones of different thicknesses on Hapstone or Edge Pro sharpener. Keeping a collection of single thickness sharpening stones is not recommended as a...

Special clamp for narrow fillet knives with reduced sharpening angle.It is an exclusive clamp for narrow fillet knives, with reduced sharpening angle. The thin clamping jaws are made of structural spring steel, which provides sufficient clamping force. This clamp has modified jaws...

The Single Clamp is a symmetric swivel clamp for double-sided sharpening without reinstalling the knife. The design of the clamp allows rigidly and symmetrically clamp knives with blades of complex geometry. It well fits hunting knives and folding knives with...

The small universal table is suitable for sharpeners with 20 mm clamping frame (TSPROF K03 and the last versions of K02). If you a not sure which sharpener you have, please contact you manager to find out the details. You...

Convex mini attachment for Blitz and Kadet knife sharpeners is easily mounted on the abrasive holder with the help of an internal mounting screw and provides a maximum offset of the sharpening angle of 11.2°. The attachment provides a uniform change...

Abrasive holder limiter 6 mm for Kadet, Pioneer, and Kadet Series. Designed to limit the movement of the abrasive holder and prevent damage to the blade by abrasive. It is supplied with an elastic dampener to soften the impact on...

Clamps designed for sharpening fillet-knives, multi-tools, Scandinavian type knives.Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side. Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a...

Many guided knife sharpeners include L-shaped Allen keys, the least expensive tool to handle hex screws. Hex screwdrivers are much easier to use than Allen keys. If you use your sharpener on a regular basis, hex screwdrivers will make your...

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

Convex Adapter is a tool for sharpening knives with the convex edge using Hapstone modular knife sharpener (R2, V8, M3). The convex angle difference can be set to the desired value. Use the convex adapter instead of stock coupling to connect...

Increased thickness of the spring provides exceptional clamping stability. They are intended for operations with the raised loading (for example at roughing operation on firm steels). Material:steel 65G ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Abrasive load, without deviations:...

Double Clamps securely hold a blade of any shape, ensuring that the jaws fit the knife back surfaces and free access to the blade for sharpening. The clamps design is based on three main components: the base, flat springs, and...

The Axicube One Sharpening Angle Finder (Rev 2) is designed for high-precision measurement of angles between planes and the inclination of a surface from the horizontal and vertical levels. MEMS (Micro Electro Mechanical System) technology with ultra-precise electronic sensors of...

Large plastic handle knob for TSProf K03. Fits all K03 guide rods. LE Series handles are made of PLA thermoplastic. Color variations are available.

Leading Edge Universal Upgrade enhances the capabilities of TSProf K03 and Kadet knife sharpeners with features of the Leading Edge sharpening platform. Universal Upgrade includes: Leading Edge Core with magnetic working table (one magnet block) and three-point knife guide Long...

Designed for upgrading Blitz and Blitz 360 sharpening systems. It consists of an extended frame of the rotary mechanism and whole-milled aluminum clamps.The frame and clamps are made of aircraft aluminum, with black anodizing according to the international Qualanod standard....

Universal Convex Adapter with a range of 4.3, 7.2, AND 10.7 degrees.Convex sharpening provides high cutting capabilities to the blade while maintaining high strength of the cutting edge. The convex edge acts as a wedge, moving apart up the material...

TSProf K03 Pro Convex Attachment is mounted on the abrasive holder and provides a uniform angle change across the entire width of the secondary bevels, producing a radius shape of the lens as a result of the work. Suitable for...

Stand for TSProf K03 is a not-so-expensive copy of the original stand made by TSProf with the same shape and dimensions. The weight is 7.2 lbs (3.3 kg). The stand is compatible with all K03 models.Stand kit includes 3M bumpon...

The increased spring thickness provides exceptional clamping stability. They are designed for operations with high loads (for example, in a roughing operation on solid steels). Material: 65G steel, ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Load on abrasive, without...