Spring-Assisted Stopper Ring to limit the movement of the horizontal shaft in the pivot unit. The stopper is suitable for 6-mm guide rods and compatible with all Hapstone knife sharpeners, TSProf Blitz and Kadet.

Hapstone PlaneShift Series includes components of Hapstone RS (such as stone holders or clamp system) adopted for other sharpening systems: PPA, WSPA, KME, Wicked Edge.Universal Stone Holder for Work Sharp Professional Precision Adjust is equipped with a digital angle gauge...

Designed for mounting the standard K03 and Kadet clamps on the turning frame. Positioning the clamps with the adapter on the edges of the frame allows an increase effective length of the frame by 4 cm. This extends the clamping...

4mm spring-assisted stopper ring to limit the movement of the horizontal shaft in the pivot unit.  The stopper is suitable for 4mm guide rods and compatible with KME 4mm Universal Stone Holder.

Special clamp for narrow fillet knives with reduced sharpening angle.It is an exclusive clamp for narrow fillet knives, with reduced sharpening angle. The thin clamping jaws are made of structural spring steel, which provides sufficient clamping force. This clamp has modified jaws...

2nd Generation of LE Series stone holders is unbreakable.Work Sharp Precision Adjust is a fantastic sharpener. However, it's limited by stock sharpening stones mounted on the proprietary holder. 4" Stone Holder for Work Sharp Precision Adjust overcomes the limitation. As of...

The new revision 2 of the stone holder is equipped with auto-aligning jaws, a digital angle gauge holder, and a stone-changing pin.Owners of KME sharpeners were always limited by sharpening stones form-factor. The Universal Stone Holder overcomes the limitation. As of today,...

Hapstone PlaneShift Series includes components of Hapstone RS (such as stone holders or clamp system) adopted for other sharpening systems: PPA, WSPA, KME, Wicked Edge.Single-clamp knife sharpeners have consistently been less adaptable than multi-clamp systems when it comes to sharpening...

Extendable Table Module for Hapstone modular sharpeners is useful for sharpening long and short knives that are difficult to clamp. The central part features the three-point guide similar to Hapstone V7 knife sharpener. Side supports can be set in the desired...

6" Multi Upgrade Kit for Work Sharp Precision Adjust includes everything to start effectively using 6" stones (Edge Pro form-factor and flat end stones). The kit includes: LE Series 6" Stone Holder KakBritva Wide Slit Clamp with 7 mm opening (special)...

Fine-Tuning Adapter is a simple tool for maintaining the chosen sharpening angle while working on Hapstone knife sharpener.Specification Material: Aluminum Compatibility: Hapstone Modular Sharpeners, Hapstone M2, Hapstone V6, Hapstone V5, Edge Pro Apex

Chisel Module is an optional attachment for sharpening chisels and planer blades on Hapstone modular sharpeners. The module is mounted on the pedestal of the Hapstone Platform and is fixed with two screws. Sharpening angle 11 to 45 degrees. Maximum width 71 mm.Note....

V-Block Clamp Support eliminates flexing of V-Block Clamp and may significantly improve the sharpening quality.When flipping the blade, keep the support in place by hand.

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

The Single Clamp is a symmetric swivel clamp for double-sided sharpening without reinstalling the knife. The design of the clamp allows rigidly and symmetrically clamp knives with blades of complex geometry. It well fits hunting knives and folding knives with...

Work Sharp Precision Adjust is a fantastic sharpener. However, it's limited by stock sharpening stones mounted on the proprietary holder. 6" Stone Holder for Work Sharp Precision Adjust overcomes the limitation. As of today, you may use any 6" sharpening stones...

The Axicube One Sharpening Angle Finder (Rev 2) is designed for high-precision measurement of angles between planes and the inclination of a surface from the horizontal and vertical levels. MEMS (Micro Electro Mechanical System) technology with ultra-precise electronic sensors of...

Scissors Module for sharpening scissors and shears on Hapstone modular sharpeners.

R098 Magic Arm provides stable support for LED light. The two ball joints can adjust the angle 360 degrees and lock it with one knob. Up to three segments can be connected in series.Features Aluminum alloy + ABS Weight 3oz (85g)...

Convex Adapter is a tool for sharpening knives with the convex edge using Hapstone modular knife sharpener (R2, V8, M3). The convex angle difference can be set to the desired value. Use the convex adapter instead of stock coupling to connect...

8mm spring-assisted stopper ring to limit the movement of the horizontal shaft in the pivot unit.  The stopper is suitable for 8mm guide rods and compatible with 8mm Edge Pro Apex and the 8mm KO3.

Double Clamps securely hold a blade of any shape, ensuring that the jaws fit the knife back surfaces and free access to the blade for sharpening. The clamps design is based on three main components: the base, flat springs, and...

Stand for TSProf K03 is a not-so-expensive copy of the original stand made by TSProf with the same shape and dimensions. The weight is 7.2 lbs (3.3 kg). The stand is compatible with all K03 models.Stand kit includes 3M bumpon...