William C.
solid part, premium feel, and holds 4" venev stones absolutely solidly.
Very impressed and very happy
Brian S.
Much higher quality than I even expected from you guys! Top notch stoneholder, that's going to last for years
Brady W.
Works very well , now i can use all kinds of high grit resin bonded diamond stones on my worksharp precision adjust.
john g.
Great quality, very well made. Amazing upgrade to an affordable system. A friend of mine has a $700 guided system. He was jealous of the edge I showed him today.
John B.
Great product to quickly change stones without putting on a new rod. The worksarp brand tribars are nice. But I've got bad eyes. Can't really tell what grit I'm on, and often get mixed up. I bought stones with different colors. No more mixup. And, no more switching bars. All done, all in one.
Robert P.
Makes sharpening even more fun. Everyone should have this!
Jeremy C.
Extremely great product & customer service. Top Notch!!!!
Troy B.
Awesome to be able to use my existing small stones with this perfect addition to a great jig
Shane O.
Definitely a game changer. Awesome products
Garland Holland
Fitment Issue
There is a fitment issue with mine and I hope I can get a replacement.
Niclas Johansson
Awesome
Awesome product. Bought the plastic one first but orderd this one just to see. Much better than the other one.
You can feel the quality just by holding it.
Patrick Barr
You can not keep the Angle Witz this Stone Holder
The Stone holder is to loose on the Rod, so you can‘t hold an consistent Angle while sharpening your Knife. The hole for the Rod is on Both ends to wide. Sorry for my English
Mony Weschler
works great! these stones work and are a pleasure to use
Tony Erickson
4” plate/stone holder
I just received my sharpening plate holder and it works great. Better than I expected. Good buy.
Daryle Trefz
High quality
Must have for Work Sharp in order to use the Cerberus stones. Turns a mediocre sharpening system into a great one
Sal Bevilacqua
Incredible craftsmanship! Great upgrade for my Worksharp Precision Adjust!
Anonymous
Solid piece of kit
Quality materials and sturdy built
I picked this up in hopes of using my work sharp more. Take your time and get angles right and you’ll be rocking n rolling in no time
Anonymous
Does not work
Holder does not hold the stones flat. There is a gap between the stone and holder. I would not recommend this product.
Gordon Fleming
Its usable and well machined but mine has a gap where the black end meets the stone,venev 4 inch cerberus,as i say still usable but keep checking your angles♂️
Ragnar Staude
Worth It!
I’m new to sharpening. I’ve done a handful of knives on the cheap stones my Worksharp came with and THOUGHT it was decent. Two knives with these stones made me realize just how much better they are! If you want absolutely game changing edges in your knives, buy these stones!
Dean McDowell
revision needed
Overal machine quality is excellent however the sharpening rod boring is too large which creates an inaccurate angle while sharpening.
Andrés Moreno
Moving black part modifies the stones angle... Larger pipe needed there
John Buchan
With careful setup, this works well
Works great with Venev Cerberus stones, but you need to ensure the stone is completely flat against the holder, otherwise you will be at a slightly different angle than intended.
Eric Wurtz
It’s ok
It doesn’t hold the same angle as the original set up from work sharp. Doesn’t really fit without hitting the blade holder at 15 degrees. Also, it is a bit of a pain to get the stone to sit flat. Not sure i would get it again.
Paul Asbell
Could use improvement
The stone holder works ok, but needs some improvements on holding stones that are square. It holds the notched stones ok, but putting in a square stone, the stone does not sit flush with the holder and has tendencies to be un even and that will cause problems with angle on your knife. Suggestion, make a second holder for stones without the notch, so that there is a flat square face on the end of the holder, to butt up the square edge of your square stones. I like the nice aluminum.
Anonymous
Works if you cut down angle where it contacts stone.
Jay Schnitzer
Stone holder works great with KME mounted ceramic stone and strops.
Does a good job with Venev 4” Cerberus, holds tight, but you have to adjust the stone to sit level. I wish the holder was more square so stone would mount flush.
Anonymous
Expand Work Sharp Capability
It's nice to have the ability to work other grits for the Work Sharp than what comes with the Elite unit. The holder has nice spring tension to hold the diamond stones for use. Stones fit easily and require little centering. The stones lie flat without any gaps underneath which another reviewer had issues with. The holder could use a better design for the fingers to hold to stroke the stone on the edge. After adding water to the stone surface the fingers need to be dried off otherwise slip a bit. I added some anti-slip strips so don't need to dry the fingers every time.
Jim Sheppard
Purchased for it's size to get the most area used with the 4"stones it has proven to be an excellent tool. Stones attach easily and are comfortable to hold. Works great.
Joseph Chilleme
This device is significantly better than the 3d printed version that first came out. Combine what this brings to the table with the simplicity of the work sharp system and its a game changer.
If you own a work sharp system, you owe it to yourself to buy this product and "unleash the beast"
Anonymous
Very useful product
Works well
Ralph Kammeyer
Very nice . Am happy with the product
Jeff Koppen
Works really well. Easy to change stones and also easy to disassemble and clean. I've sharpened 60-70 edc knives, many reprofiled. The only reason that its not a glowing 5 star review is that on some stones, the clamp sort of angles up allowing the stone to raise that end approximately 1/16 of an inch off holder. Besides that small issue, it works great with 4 inch;
Venev "Dog" diamond stones, diamond plates and metal backed leather strops.
richard meador
Definitely a must have..
Anonymous
Excellent accessory
Works perfectly as intended, gets the stone right to the edge of the edge. Opens up the available abrasives, though wish there were some higher polishes available.
Nathaniel Hoerchler
Excellent
Great product that increases the versatility of the work sharp system greatly. Securely holds stones while making change out easy.
Ed Kathan
Get one while in stock
I have both 4" and the 6" holder.
I use them with the diamond plates from work sharp
allen perry
Great addition to my Work Sharp
It holds stones very securely and is very easy to use. Good value.
HENRY WONG
Great alternative and unlocks potential for different grit stones over stock. However stone does not lay perfectly flat, the spring side is slightly lifted.
Kyle Baysinger
Great product! Totally changed the way I was able to use the sharpener.
Kyle Baysinger
Great!
Great product! Totally changed the way I was able to use the sharpener.
Glenn Gibbs
improves the Worksharpener by allowing for the use of higher or lower grit stones to be used than the three that are provided with the sharpener.
Anonymous
Seems okay
It’s a decent holder, but machined and finished in a hurry. The stones will angle up as they are used, so you have to be ready to re-affix the stone so it is flush.
Doug Palmer
Stone holder does not hold stone properly. The black plastic piece flexes changing the angle of stone at that end while using. I have retired this product for now.
Gregory Karpe
This is a must-have device and it greatly enhances the options available to the Work Sharp Precision Adjust Knife Sharpener. Also, now, this Sharpener can reach the base of the blade, which was often impossible with the stock stones
Roy Berg
Very nice
Stone holder works great
Rick Rupert
Works great for work Sharp. I read reviews saying it was a little loose on the rod. I can say I didn't find that to be the case for me. Holds stones good. I like it.
John Amoroso
Works perfectly. Let's me use my Fallkniven DM4 & CC4 stones in the Worksharp. I like using the stone holder better that the original stones.
Christopher McCoy
Works perfectly only thing i might add is some sort of handle. Otherwise great product.
Anonymous
Works well also well made.
![Hapstone Premium CBN Stone [6" x 1"]](http://www.gritomatic.com/cdn/shop/files/Hapstone_20Premium_20CBN_20lowres_201_f1e9933e-8af0-4505-9edc-45cc03468aba_600x@3x.progressive.jpg?v=1739345328)
![Hapstone Spring-Assisted Stopper [6 mm]](http://www.gritomatic.com/cdn/shop/files/Hapstone_20Spring-Assisted_20Stopper_20Ring_201_600x@3x.progressive.jpg?v=1739341874)
