Many guided knife sharpeners include L-shaped Allen keys, the least expensive tool to handle hex screws. Hex screwdrivers are much easier to use than Allen keys. If you use your sharpener on a regular basis, hex screwdrivers will make your...

Designed for mounting the standard K03 and Kadet clamps on the turning frame. Positioning the clamps with the adapter on the edges of the frame allows an increase effective length of the frame by 4 cm. This extends the clamping...

Special clamp for narrow fillet knives with reduced sharpening angle.It is an exclusive clamp for narrow fillet knives, with reduced sharpening angle. The thin clamping jaws are made of structural spring steel, which provides sufficient clamping force. This clamp has modified jaws...

The Single Clamp is a symmetric swivel clamp for double-sided sharpening without reinstalling the knife. The design of the clamp allows rigidly and symmetrically clamp knives with blades of complex geometry. It well fits hunting knives and folding knives with...

The small universal table is suitable for sharpeners with 20 mm clamping frame (TSPROF K03 and the last versions of K02). If you a not sure which sharpener you have, please contact you manager to find out the details. You...

Clamps designed for sharpening fillet-knives, multi-tools, Scandinavian type knives.Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side. Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a...

Double Clamps securely hold a blade of any shape, ensuring that the jaws fit the knife back surfaces and free access to the blade for sharpening. The clamps design is based on three main components: the base, flat springs, and...

Many guided knife sharpeners include L-shaped Allen keys, the least expensive tool to handle hex screws. Hex screwdrivers are much easier to use than Allen keys. If you use your sharpener on a regular basis, hex screwdrivers will make your...

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.Due to the monolithic design of the clamps, the main advantage of...

The Axicube One Sharpening Angle Finder (Rev 2) is designed for high-precision measurement of angles between planes and the inclination of a surface from the horizontal and vertical levels. MEMS (Micro Electro Mechanical System) technology with ultra-precise electronic sensors of...

8mm Spring-Assisted Stopper Ring to limit the movement of the horizontal shaft in the pivot unit.  The stopper is suitable for 8mm guide rods and compatible with 8mm Edge Pro Apex and the 8mm KO3.

PrintSharp Center Clamp Adapter is designed to accommodate the standard side TSPROF clamps in the center of the clamp frame. It enables the usage of side clamps as a central single clamp. The adapter offers the flexibility to mount one or...