TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum sharpening angles of less than 7.5° per side.
The clamps are supplied with two types of screws:
— Shortened, designed for sharpening thin knives, at minimal angles;
— Standard, designed for knives with a spine thickness of up to 3.5 mm.
The clamps are made of a single piece of aircraft-grade aluminum, allow you to adjust the clamp to any shape of the blade and ensure the symmetry of the installation. Thanks to the two gripping points, the deflection of the blade is impossible. It is possible to independently move the clamps along the entire length of the frame. There is no need for calibration. With these clamps, it becomes possible to sharpen knives with "Scandinavian bevels" along the line of bevels.
Recommended blade length: 30-200 mm
Jaws tips thickness: 1 mm
Clamp width: 20 mm, 2 pc.
Gap between jaws in free state: 4 mm
Maximum spine thickness of a knife: 3.5 mm
Size for a wrench: HEX4 hexagon 4.0 mm
Wrench: included
