Designed for mounting the standard K03 and Kadet clamps on the turning frame. Positioning the clamps with the adapter on the edges of the frame allows an increase effective length of the frame by 4 cm. This extends the clamping...

Special clamp for narrow fillet knives with reduced sharpening angle.It is an exclusive clamp for narrow fillet knives, with reduced sharpening angle. The thin clamping jaws are made of structural spring steel, which provides sufficient clamping force. This clamp has modified jaws...

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

Double Clamps securely hold a blade of any shape, ensuring that the jaws fit the knife back surfaces and free access to the blade for sharpening. The clamps design is based on three main components: the base, flat springs, and...

The small universal table is suitable for sharpeners with 20 mm clamping frame (TSPROF K03 and the last versions of K02). If you a not sure which sharpener you have, please contact you manager to find out the details. You...

Clamps designed for sharpening fillet-knives, multi-tools, Scandinavian type knives.Mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side. Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a...

The Sharpener stand is a metal base holding TSProf K03 sharpener on the working surface of the table or workbench.It allows you to install the TSPROF Knife Sharpener at any place of the desktop; it is also useful in cases...

The convex adapter with a range of 4.3, 7.2, or 10.7 degrees.Convex sharpening provides high cutting capabilities to the blade while maintaining high strength of the cutting edge. The convex edge acts as a wedge, moving apart up the material...

Lightweight Titanium Rod for TSProf K03 helps to reduce the abrasive pressure on the cutting edge, which improves the control of the sharpening process when working with narrow stones, convex sharpening and finishing work.At one end it has a thread...

The increased spring thickness provides exceptional clamping stability. They are designed for operations with high loads (for example, in a roughing operation on solid steels). Material: 65G steel, ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Load on abrasive, without...

Sharpening Angle Extender expands the sharpening capabilities of TSProf K03. 

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.Due to the monolithic design of the clamps, the main advantage of...

Height Adjuster with an extended angle significantly expands the sharpening capabilities of TSProf K03. The angle extension nozzle allows you to sharpen knives with a sharpening angle of up to 36° per side (in a standard body up to 22°...