TSProf Kadet PRO

BLACK

Knife Sharpener (2024)

is a family of extended custom kits with the most useful and the most practical components.

The new generation of Kadet Pro

introduces four clamps with optional L-adapters and an extra-long titanium mono guide rod in addition to the standard stainless steel guide rod with a coupling. Kadet Pro 2024 combines the mobility of the Kadet Pro family with the versatility and endurance commonly found in K03 Pro Family. Buyers of Kadet Pro 2024 will have the opportunity to buy Axicube One digital angle finder, one of the best accessories made by TSPROF, with a 30% discount.

Clamps

• 🔪2x Black Anodized Wholemilled Kadet Clamps
• 🔪2x Fillet Wholemilled Kadet Clamps
• ⤵️4x Optional L-adapters to assemble L-clamps
• 📏Clamps without L-adapters = Kadet clamp length (100mm)
• 📏Clamps with L-adapters = K03 clamp length (120mm)
• 📐Minimum sharpening angle: 8.2° (with fillet L-clamps)
• 📏Maximum blade length: 340mm (with 4x L-clamps and titanium guide rod)
• 4️⃣Versatile 4-point clamping
• 🔝Center clamping with inward L-clamps
• 🔛Wide clamping with outward L-clamps

Guide Rods

• 🦿Extended Titanium Mono Guide Rod (50cm)
• 🦵Standard Stainless Steel 2-Part Guide Rod (40cm)
• 🦵🏿Stainless Steel and Titanium Guide Rods are interchangeable
• 🦾Stainless Steel and Titanium Guide Rods can be combined to make extra-long guide rod
• 🧱Improved Universal Stone Holder supports flat-end stones, Edge Pro and KME format factors
• ⚙️Grito-Handle
• 🅿️Coupling-Stopper with Parking
• ⛔Spring-Assisted Stopper

Perks

• 🎯30% Discount for Axicube One
• 🧲Ferromagnetic Zero Level Plate with PSA tape
• 🪛2x Hex Screwdrivers (4mm and 1.5mm)
• 🖊️Sharpie Marker
• 📈Waterproof Grand Logarithmic Grit Chart (Letter size)

Attention. Axicube One is not included although shown on the photos for illustration purposes.

Kadet Pro Family

TSPROF Kadet Pro is a new high-precision sharpening system in Kadet family, equipped with the rack-and-pinion lift. The rotary mechanism of Kadet Pro sharpener helps to maintain the same sharpening angle on both sides of the knife. Once turned, the lever locks the clamping frame firmly in place. By rotating the lift knob, the rotating unit moves smoothly around the virtual center where the knife's cutting edge is located. The arched rack is made of a single piece of aluminum and is integrated with a rack-and-pinion lift with toothed gearing. A locking lever, after adjusting the desired angle, allows the rotating unit to be securely locked in place.

Kadet Pro is anodized in black according to the international Qualanod standard. Anodizing is used to improve the corrosion resistance and reinforce the surface structure of the aluminum. This coating method allows the unit to retain its perfect appearance for many years.

TSPROF Kadet Pro has everything you need for top-quality sharpening: the blade turning mechanism, the ability to set any angle from 9° to 28.5°, the rigid construction and absolute precision in every detail.

Kadet Pro frame is compatible with all clamps from the TSPROF K03 sharpening system: fillet, single, double, and small universal table for sharpening of tools. Kadet Pro easily disassembles and folds up for storage or transportation. The weight of the device of 4.5 lbs (2.1 kg), makes the sharpener mobile and gives sufficient stability during sharpening.

Kits Comparison

 

Specs

• Maximum blade spine thickness: 7mm
• Maximum blade length: 340mm
• Maximum blade width: 40mm
• Minimum sharpening angle: 9°
• Maximum sharpening angle: 28°
• Maximum length of flat-end stones: 200mm
• Maximum length of mounting blanks: 200mm
• Abrasives thickness: 3 to 15mm