Fine Leather Strop is an efficient way of final polishing a cutting edge using guided knife sharpeners. A leather strop enhances the cutting edge by correcting small nicks and smoothing grooves.The stropping medium is very thin fine cowhide leather mounted...

4" x 1" Stropping Pad is made of vegetable tanned kangaroo leather with PSA tape for mounting on a empty blank (not included). To make a strop rigid, we recommend using aluminum blank with thickness 5 mm.

Many guided knife sharpeners include L-shaped Allen keys, the least expensive tool to handle hex screws. Hex screwdrivers are much easier to use than Allen keys. If you use your sharpener regularly, hex screwdrivers will make your life comfortable. Ball-End...

8mm Spring-Assisted Stopper Ring to limit the movement of the horizontal shaft in the pivot unit.  The stopper is suitable for 8mm guide rods and compatible with 8mm Edge Pro Apex and the 8mm KO3.

Anodized Aluminum Blanks 100 x 25 x 3mm are used to mount 4" sharpening stones for guided knife sharpeners. Blanks are made of high-quality 3mm-thick aluminum with flat ends. Blanks are available in one color.

Lansky knife sharpener is limited by stock sharpening stones mounted on the proprietary holder. 4" Stone Holder for Lansky overcomes the limitation. As of today, you may use any 4" sharpening stones including Venev Cerberus and any KME form-factor stones.The...

4" x 1" Stropping Pad is made of cowhide leather with PSA tape for mounting on a empty blank (not included).

Ice Auger Attachment is an optional attachment for sharpening ice augers on Zhuk knife sharpener.Plastic components are 3D-printed.

Light Mount for 8mm Rod is part of Sharpener Light Series, family of adapters to connect LED light and arms to sharpening systems.The mount is compatible with sharpening systems utilizing 8mm vertical rod: Leading Edge, Edge Pro Apex, Kazak Mosquito,...

Tsushima Whetstones are used for fine sharpening on Hapstone or Edge Pro sharpeners. Tsushima is natural stone with estimated grit approximately 5000 JIS. Tsushima stones are mounted on high-quality aluminum blanks.Tsushima (対馬) Whetstone is mined on Tsushima Island off the coast...

TSProf K03 and Kadet sharpeners are clamp-compatible but their clamps have different lengths. Although K03 Profile is not native to Kadet, the diversity of K03 and R2 clamps makes K03 Profile attractive for Kadet users.GearConnect Extension for Kadet adds extra...

Anodized Knobs are designed to move pinion on the rack to set desired sharpening angle. Knobs are made of high-strength aluminum alloy with colorless anodizing. The kit includes 2 knobs. Requires 2-mm hex key or screwdriver to replace stock knobs.

Kangaroo Leather Strop is an efficient way of final polishing a cutting edge using guided knife sharpeners suitable for 4" stones. A leather strop enhances the cutting edge by correcting small nicks and smoothing grooves. The stropping medium is a...

Glass blanks are used with lapping films for the ultra-fine sharpening knives using Hapstone or Edge Pro knife sharpeners. The glass bar is attached to an empty aluminum blank.Glass blanks are available in standard and narrow sizes. Narrow size (12...

Boride Sharpening Stones are used for sharpening knives on Hapstone Pro sharpeners. Boride offers a wide range of stones with different performance values and different rates of wear. Boride stones are made of aluminum oxide, with the exception of CS-HD...

The product page is in development. Stay tuned.Attention! GearConnect adapters use 4 mm hex sockets, no tools included. All adapters are sold in singles, never in pairs. GEARCONNECT is the family of clamp adapters to build "cross-platform" sharpening systems. An...

TSProf Pioneer bundled with heavy stand. Specs Spine thickness of knives: up to 5 mm / 0.20" in Knife blade length: up to 250 mm / 9.9" in Knife blade width: up to 40 mm / 1.6" in Minimum sharpening angle:...

GearConnect adapter to use KakBritva Side Clamp on TSProf knife sharpener (K03 or Kadet) in K03 Profile. Can be used for KakBritva Scissors Clamp.Read more about GearConnect for TSProf.Attention! GearConnect adapters use 4 mm hex sockets, no tools included. All...

LE Series Base for KME knife sharpener is made of PLA thermoplastic with non-slip rubber pads. The tapered pivot (vertical rod) supports the sharpener in the desired position. LE Series Base improves the sharpening experience by eliminating any wobble between...