For Hapstone R2
For TSProf K03
For Jende JIGS
For WorkSharp PA
Narrow stone holder is easy-to-use lightweight holder for stones and blanks. The support plate located along the entire bar provides additional setup stiffness and removes unnecessary loads, thus allows to work with fragile stones without using blanks.
The distance from the handle to the stone does not depend on the length of the abrasive; it increases the accuracy during finishing operations.
It is a perfect way of work with narrow stones 150x12 mm for sharpening of recurve, concave and convex blades, for sharpening pen knives and folding multitool knives by Victorinox.
The titanium guide makes the holder lightweight. Titanium is lighter and stronger than aluminum, so titanium is widely used in aviation.
Monolithic milled clips are made of aluminum alloy D16T and precisely oriented in the axial direction using an auxiliary plate of polished stainless steel, and a titanium guide.
The easy movement of the holder allows you to feel and control the abrasive so well that you have a feeling of manual sharpening, but with the support and TSPROF guaranteed accuracy.
The abrasive holder provides a convenient surface for the installation of the digital angle gauge.
The design of the holder is very aesthetic, and the holder operation is pleasant.
It is an easy-to-use holder; it allows you to reinstall various bars, blanks, and other tools quickly.
The support plate is located along the entire bar and provides additional setup stiffness and removes unnecessary loads, thus allows to work with fragile stones without using blanks.
The kit comes with two limiting rings with a damper; one of the rings works as a parking device.
Combined bevels of clamping jaws are 90 + 45 degrees.
Clamping jaws: width 18/16 mm, the width of the supporting plate is 16 mm, effective height is 5 mm (height of the groove under 45 degrees is 3 mm)
min/max abrasive size is from 105 mm to 175 mm
If you have a question regarding this product, please feel free to ask.