Aoto Whetstone for KME (Mounted)

  KME form-factor stones are suitable for KME, Hapstone, Blitz 360 and all KME compatible sharpeners



Aoto Whetstones are used for fine sharpening on KME and Hapstone sharpeners. Aoto is silica natural stone with estimated grit approximately 2000-3000 JIS.

Aoto (青砥) Whetstone is mined in Kameoka, Kyoto in Japan.

Historically Aoto was the most common whetstone in Japan to sharpen kitchen knives.

Aoto is preliminarily lapped and does not require lapping after purchase. Aoto should be used with water as a lubricant. Soak Aoto in the water for 2 minutes before use. During the sharpening, the slurry is released from the surface. It's not necessary to keep slurry on the stone surface.

Aoto stones may have slight natural imperfections and inclusions.

Advantages of aluminum blanks

  • If you accidentally drop the stone, it's less likely you break it;
  • Much longer life span for the stone after multiple flattening and lapping;
  • Easy identification due to laser engraving;
  • Reliable clamping for stones of imperfect shape.

Stones mounted on aluminum blanks are thicker than stock KME stones. We recommend using the thickness compensator if you use stones of different thickness.

Watch KnifeKrazy YouTube review of the new form-factor.

Questions and answers

If you have a question regarding this product, please feel free to ask.