SHOW FILTER (37)

Showing 37 products

TSProf

SKU: TSPROF-BLITZ-360STONEHOLDER

AVAILABILITY: In stock (4 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

$53.00 USD
TSProf

SKU: TSPROF-AXICUBE-ONE

AVAILABILITY: In stock (9 items)

PRODUCT TYPE: Accessories and Tools

VENDOR: TSProf

The Axicube One Sharpening Angle Finder (Rev 2) is designed for high-precision measurement of angles between planes and the inclination of a surface from the horizontal and vertical levels. MEMS (Micro Electro Mechanical System) technology with ultra-precise electronic sensors of...

$131.00 USD
TSProf

SKU: TSPROF-COMPENSATOR-8MM

AVAILABILITY: In stock (29 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

$12.00 USD
TSProf

SKU: TSPROF-SPRING-CENTER

AVAILABILITY: In stock (5 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Increased thickness of the spring provides exceptional clamping stability. They are intended for operations with the raised loading (for example at roughing operation on firm steels). Material:steel 65G ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Abrasive load, without deviations:...

$18.00 USD
TSProf

SKU: TSPROF-CLAMP-KADET-MILLED-FILLET

AVAILABILITY: In stock (45 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

TSPROF Kadet whole-milled fillet clamps are designed for fixing knives with a spine thickness of up to 3.5 mm, on a TSPROF Kadet Expert sharpening system. The radially convex shape of the outer surface allows you to set the minimum...

$92.00 USD
TSProf

SKU: TSPROF-SPRING-SIDE

AVAILABILITY: In stock (15 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

The increased spring thickness provides exceptional clamping stability. They are designed for operations with high loads (for example, in a roughing operation on solid steels). Material: 65G steel, ground, heat-treated; Thickness: 1 mm (standard 0.8 mm); Load on abrasive, without...

$18.00 USD
TSProf

SKU: TSPROF-TABLE

AVAILABILITY: In stock (17 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

The small universal table is suitable for sharpeners with 20 mm clamping frame (TSPROF K03 and the last versions of K02). If you a not sure which sharpener you have, please contact you manager to find out the details. You...

$169.00 USD
TSProf

SKU: TSPROF-CLAMP-SIDE-MILLED

AVAILABILITY: In stock (19 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.Due to the monolithic design of the clamps, the main advantage of...

$128.00 USD
TSProf

SKU: TSPROF-AXICUBE-I-UP

AVAILABILITY: In stock (31 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Axicube-Integrated Angle Finder (Axicube-I) measures the sharpening angle with an accuracy of 0.1° and helps to monitor and trace any changes in the angle, in real-time, e.g. when changing abrasives. The bright display is easy to read in all lighting conditions....

$121.00 USD
TSProf

SKU: TSPROF-CLAMP-SIDE

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Double Clamps securely hold a blade of any shape, ensuring that the jaws fit the knife back surfaces and free access to the blade for sharpening. The clamps design is based on three main components: the base, flat springs, and...

$100.00 USD
TSProf

SKU: TSPROF-K03-KNOBS

AVAILABILITY: In stock (10 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Anodized Knobs are designed to move pinion on the rack to set desired sharpening angle. Knobs are made of high-strength aluminum alloy with colorless anodizing. The kit includes 2 knobs. Requires 2-mm hex key or screwdriver to replace stock knobs.

$14.00 USD
TSProf

SKU: TSPROF-K03-LIFTPRO-AL

AVAILABILITY: In stock (32 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

K03 PRO Height Adjuster expands the sharpening capabilities of TSProf K03 and K03 Expert.New height adjuster to upgrade TSProf K03 to K03 PRO. The rack and pinion lift is equipped with a steel rail with involute (toothed) gearing, allowing stepless...

$181.00 USD
Aluminum
TSProf

SKU: TSPROF-BLITZ-MILLED

AVAILABILITY: In stock (18 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Wholemilled clamps are made of high-strength aluminum alloy with a protective coating and heat treatment. This type of clamps provides the highest rigidity and stability of the device operation.- Spine thickness up to 4.5 mm- Jaws width: 20 mmFor 2mm...

$77.00 USD
TSProf

SKU: TSPROF-CONVEX-UNIVERSAL

AVAILABILITY: In stock (3 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Universal Convex Adapter with a range of 4.3, 7.2, AND 10.7 degrees.Convex sharpening provides high cutting capabilities to the blade while maintaining high strength of the cutting edge. The convex edge acts as a wedge, moving apart up the material...

$47.00 USD
TSProf

SKU: TSPROF-BLITZ-STOPPER

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Abrasive holder limiter 6 mm for Kadet, Pioneer, and Kadet Series. Designed to limit the movement of the abrasive holder and prevent damage to the blade by abrasive. It is supplied with an elastic dampener to soften the impact on...

$7.00 USD
TSProf

SKU: TSPROF-BLITZ-LADAPTER

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

L-adapter is intended for mounting stock clamp onto the Blitz Pro sharpening systems. By positioning the clamps with the adapter on the frame edges, the maximum distance between clamps can be extended by 1 inch (24mm), thereby enhancing the capability...

$43.00 USD
TSProf

SKU: TSPROF-CONVEX-PRO

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

TSProf K03 Pro Convex Attachment is mounted on the abrasive holder and provides a uniform angle change across the entire width of the secondary bevels, producing a radius shape of the lens as a result of the work. Suitable for...

$54.00 USD
TSProf

SKU: TSPROF-CLAMP-SIDE-FILLET

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

$124.00 USD
TSProf

SKU: TSPROF-BLITZ-TO-PRO

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Designed for upgrading Blitz and Blitz 360 sharpening systems. It consists of an extended frame of the rotary mechanism and whole-milled aluminum clamps.The frame and clamps are made of aircraft aluminum, with black anodizing according to the international Qualanod standard....

$106.00 USD
TSProf

SKU: TSPROF-BLITZ-SCISSORS

AVAILABILITY: In stock (7 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

$110.00 USD
TSProf

SKU: TSPROF-BLITZ-360GAUGEHOLDER

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Protractor stand with a magnetic base gets fixed on the frame of the Blitz Pro or Blitz sharpening device quickly and securely and helps you set the sharpening angle with 0.1° degrees accuracy.To set the angle using a digital protractor:1. Clamp...

$48.00 USD
TSProf

SKU: TSPROF-PIONEER-FRAME

AVAILABILITY: In stock (8 items)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

$60.00 USD
TSProf

SKU: TSPROF-EXTENSIONROD-6MM

AVAILABILITY: Out of Stock

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

Extension Rod is designed for Pioneer, Kadet, and Blitz sharpening systems of all modifications. It is made of chrome-plated steel and has an extended length (325 mm) compared to the standard (225 mm). It connects to the abrasive holder for...

$36.00 USD
TSProf

SKU: TSPROF-CONVEX-ONE-10.7

AVAILABILITY: In stock (1 item)

PRODUCT TYPE: Sharpener Accessories

VENDOR: TSProf

The convex adapter with a range of 4.3, 7.2, or 10.7 degrees.Convex sharpening provides high cutting capabilities to the blade while maintaining high strength of the cutting edge. The convex edge acts as a wedge, moving apart up the material...

$25.00 USD
10.7°