Curved Venev Bonded Diamonds are used for sharpening inwardly curved blades on Hapstone knife sharpeners. Diamond sharpening stones offer excellent performance in sharpening knives of any steel. The working surface is curved. Curved diamonds are designed to sharpen kukris, karambits, hawkbills, scythes and any type of recurved blades.
Curved Diamonds consist of a 2 mm-thick diamond-bearing layer on a metal base. The diamond-bearing layer contains evenly distributed diamond grains with metal bonding. Metal bonding gives the sharpening diamond stone a long lifespan.
Venev Diamonds are available in a wide range of grit from F 80 (200 um) to F 2000 (1 um).
Venev Diamonds are recommended to be used with water as lubricant for the best feedback. The diamond does not absorb water. Splash water on the stone's surface. Dry usage is acceptable practice.
Venev Diamonds may have the geometry tolerance up to 0.2 mm. Because diamonds are curved, extra lapping by customer is not permitted.
The primary purpose of curved diamonds is precise honing at inside of pipe. The organic bonding technology is not suitable for this task.
This is completely normal for diamond sharpening, especially on high carbon steels. Diamonds offer high performance, sacrificing cutting edge quality. If you need a very accurate cutting edge, you should switch to non-diamond abrasives.
The first thing to consider while combining stones from different brands is grit scale. Venev 2000 grit diamonds use 1 micron particles . In term of grit, Venev 2000 is an ultra-fine finish (approximately 15K waterstone grit).
Curved diamonds are marked with FEPA-F, JIS and national standard GOST 9206 (in micron) on the reverse side. FEPA-F is used to choose a desired grit when purchasing. F 2000 grit diamond is marked "1/0-F2000-J15000").
If you have a question regarding this product, please feel free to ask.